Home Uncategorized What if the vacuum packaging machine can’t seal

What if the vacuum packaging machine can’t seal

by admin

1. First, check whether it is due to the failure of the pipeline bleeder valve and the airbag exhaust is not smooth. If so, repair and replace it in time

2. Secondly, check the heat closing time to see if the relay is improperly adjusted. If the relay is improperly adjusted, it should be adjusted in time

3. Check to see if the stop position of the conveyor belt is inaccurate. If the position is inaccurate, adjust the stroke switch bump appropriately

4. Check whether the power supply and voltage are unstable. If so, install a stable power supply

5. Check whether the sealing at both ends of the sealing table is not well sealed. If it is not well sealed, adjust the supporting plate screws in time to see whether the screws are too tight, and rotate the adjusting screws counterclockwise

extended data: & nbsp& nbsp;

safety measures for the use of vacuum packaging machine

1. Keep the machine clean and tidy, and the use environment should not be too wet

2. Do not use in flammable, explosive and other harsh environments

3. The three-phase four wire machine shall be equipped with the same type socket consistent with the machine power supply, and shall meet the requirements of three-phase four wire power supply; The single-phase machine shall be equipped with three pole power socket and ensure the reliable grounding of the machine

4. Unplug the power plug when overhauling the machine to prevent electric shock

5. Keep the vacuum chamber in the best clean state, and wipe the inside of the machine regularly. The oil of the vacuum pump can only be added to two-thirds of the oil window of the vacuum pump. Use and maintain the vacuum pump in strict accordance with the operation manual of the vacuum pump

reference source: Baidu Encyclopedia – vacuum packaging machine

the vacuum machine doesn’t work

go to Baidu app to view
Answer

 it cannot be sealed. There are possible reasons, such as the control panel heat sealing switch is not selected, or the heating power is not turned on. The heating element of the packaging machine is damaged or the power connection of the heating element is disconnected. There is a problem with the panel setting, and the heating time is set to 0. There is something wrong with the control component and the heating time relay is damaged. Battery valve failure: the sealing solenoid valve does not act, and the air bag does not bulge (or the air bag is damaged)

 1. First, check whether it is due to the failure of the pipeline bleeder valve and the poor exhaust of the airbag. If so, repair and replace it in time

 2. Secondly, check the heat closing time to see if the relay is improperly adjusted. If the relay is improperly adjusted, it should be adjusted in time

 3. Check to see if the stop position of the conveyor belt is inaccurate. If the position is inaccurate, adjust the travel switch bump appropriately

 4. Check whether the power supply and voltage are unstable. If so, add a stable power supply

 5. Check whether the sealing at both ends of the sealing table is not well sealed. If it is not well sealed, adjust the supporting plate screws in time to see whether the screws are too tight, and rotate the adjusting screws counterclockwise

 safety measures for the use of vacuum packaging machine 

 1. Keep the operating environment of the machine clean and tidy, and the operating environment should not be too wet

 2. Do not use in flammable, explosive and other harsh environments

 3. The three-phase four wire machine shall be equipped with the same type of socket consistent with the machine power supply, and shall meet the requirements of three-phase four wire power supply; The single-phase machine shall be equipped with three pole power socket and ensure the reliable grounding of the machine

 4. Unplug the power plug when overhauling the machine to prevent electric shock

 5. Keep the vacuum chamber in the best clean state, and wipe the inside of the machine regularly. The oil of the vacuum pump can only be added to two-thirds of the oil window of the vacuum pump. Use and maintain the vacuum pump in strict accordance with the operation manual of the vacuum pump

10 more

has the sponge been removed from the upper cover latch
is the bag not placed in the vacuum tank
and the bag should not be too full

related posts

Leave a Comment