Home Uncategorized When the automatic packaging machine encounters a fault problem, how to eliminate the fault problem?

When the automatic packaging machine encounters a fault problem, how to eliminate the fault problem?

by admin

1. Electromagnet does not engage: most of the reasons for this failure are internal faults of the main engine, burn-out of electromagnet coil, line interruption and other reasons

the solution is: first check whether there is a problem inside or outside the host; Secondly, check the safety tube of the electromagnet, check whether the electromagnet has signs of energization, eliminate mechanical jamming, and detect the internal power supply when everything is normal

2. The electromagnet is often not engaged in weighing and packaging machines. The reasons for this failure are: Sensor damage, bridge voltage failure, wrong line connection or interruption

the elimination method is to detect the load signal of the sensor, connecting line or host, and then look at it to detect the bridge supply and amplification circuit or computer output display circuit
3. Sometimes, the stability of the system is poor, resulting in unstable bag capacity

to solve this problem, you can test whether the line is faulty, or remove the host, apply a reset signal through internal short circuit, judge whether the fault is in the machine or from the switch, and then solve the problem.

related posts

Leave a Comment